If successful, the handset settings will be reset to the initial factory settings, otherwise the settings will remain. After resetting, the handset will return to standby mode.
█Base Selection
This function allows you to select a base from those already registered to the handset. To select a base:
1.Press 
under the word Menu on the screen to display the main menu list.
2.Press up 
or down 
to scroll to HS Settings and then press under the word Select.
3. Press up or down
to scroll to Select Base and then press under the word Select.
4.Press up 
or down 
to select the base you want and
then press 
under the word Select. If you select a
5.The display will show Searching and then BS Selected. The display will automatically return to the previous menu screen.
█Out of Range Alarm
This function allows you to know when the handset is out of range of the base, and a beep will sound. Your ClearSounds® A1600E comes from the factory preset for Out of Range Alarm ON. To change this setting:
1.Press under the word Menu on the screen to display the main menu list.
2.Press up 
or down 
to scroll to HS Settings and then press under the word Select.
3.Press up 
or down 
to scroll to Tone Setup and then press 
under the word Select.
4.Press down 
to select Out of Range and then press 
under the word Select.
5.Press up 
or down 
to select On or Off and then press 
under the word Select.