ClearSounds A1600E operating instructions Charging the Handset, Using the Handset Carrying Clip

Page 7

Charging the Handset

1.Place the handset into the base. The LCD screen will light up and you will hear a beep to indicate charging has begun.

2.Important: Before initial operation, you should fully charge the handset for at least 15 hours.

3.After the batteries are fully charged, begin the registration process as described on page 9.

When battery power is very low and you place the handset on

the base, the display will show . Check the battery icon on the LCD to see the battery charge level.

Using the Handset Carrying Clip

You may choose to use the optional belt clip provided with your handset.

1.To attach, slide the belt clip down onto the grooves. Press the tabs on the belt clip into the slots to attach.

2.To remove, insert a screwdriver along the edge of one of its “arms” and release the clip and then lift it off.

7 – ENGLISH

Image 7
Contents Operating Manual Prior to USE Important Safety InstructionsEnglish English Installation of Your ClearSounds A1600E Dect Installation StepsBase Desk/Table Mounting Installing BatteriesCharging the Handset Using the Handset Carrying ClipMenu Navigation To Access a Menu OptionScreen Navigation Registering the Handset Basic Phone FunctionsDelete/Terminate Handset Turning the Handset Power On/Off ModeHandset Reset Phone Handset SettingsHandset Name Base Selection Out of Range AlarmNo dial tone TroubleshootingNothing appears on the display To learn more, call ClearSounds at Technical SpecificationsFCC Wants YOU to Know Service Requirements Industry Canada CS03 Statement Limited ONE-YEAR Warranty Service in United States and Canada, contact