Uniden 1380BK manual Setting the Time and Date, Hour, Minutes, Month

Page 19

Setting the Time and Date

Note: If you have subscribed to the Caller ID display feature from your telephone company, the telephone company sends the time and date with the Caller ID information. The unit automatically sets the time and date when the first call is received.

Hour

1.Press and release the MENU button until the screen displays SET TIME/ DATE.

2.The hour digits flashing indicates that the unit is ready to accept entry. Use the keypad numbers to enter a two digit number to set the hour.

3.When finished, the cursor moves to the Minute field. Now you’re ready to enter the minutes.

Minutes

1.Use the keypad numbers to enter a two digit number to set the minutes.

2.When finished, the cursor moves to the AM or PM field. Now you’re ready to enter the time of day, AM or PM.

AM/PM

1.Press “*” on the keypad for AM and press “#” for PM to set the time of day.

2.When finished, the cursor moves to the Month field. Now you’re ready to enter the month.

Month

1.Use the keypad to enter two digit numbers to set the month.

2.When finished, the cursor moves to the Date field. Now you’re ready to enter the day.

19

Image 19

Contents

User’s Guide Interference Information Important InformationTelephone Network Information FCC RF Radiation Exposure Statement REN NumberHearing Aid Compatibility LicensingTable of Contents Message Indicators Introduction Before You Begin Parts ChecklistTelephone Jack Requirements Important Installation Information Base Layout SwitchDesktop Installation Installing the PhoneWall Mounting the Phone Rotate the stand 180 degrees, and insert Instructions for MovingAnswerer Answering System SetupRecording the Outgoing Announcement Speakerphone Location Using the SpeakerphoneTelephone Operation Reviewing the AnnouncementTemporary Tone Dialing Switching between Speaker and HandsetReceiving a Phone Call Placing a Phone CallRedial FlashMute Setting the Rings to Answer Telephone Set UpSetting the Recording Quality Setting the Incoming Message or Memo LengthToll Saver Setting the Display Contrast Setting the Security CodeSetting the Dialing Mode Setting Your Local Area CodeSetting Day of Week Month Setting the Time and DateHour MinutesDate Setting the LanguageMessage Volume Ringer VolumeSpeakerphone Volume Handset VolumeSummary Screen Caller ID FeaturesReceiving and Storing Calls Caller ID with Call WaitingReviewing Call Records Dialing Back Deleting CID RecordsIf You Programmed Your Local Area Code If You Did Not Program Your Local Area Code Storing a Number in Memory MemoryStoring a Redial Number to Memory Copying Caller ID Memories to User Memory Erasing a Stored NumberDialing a Number Stored in Memory Inserting a Pause in the Dialing SequenceChanging a Stored Number Dialing a Number Stored in Memory While On- hookReviewing Stored Numbers Number For Memory Location Chain Dialing from MemoryCall Answering Answering System OperationAuto Disconnect Erase Messages Playing MessagesLeaving a Memo Remote AccessMemory Full Remote Access Commands Unknown Number Message IndicatorsTelephone Solutions Troubleshooting GuidePage General Product Care Causes of Poor Reception Warranty Inserting a Pause in the Dialing IndexPlacing a Phone Call If You Contact Uniden’s Phone Number