Panasonic KX-TC1105ALB, KX-TC1105ALN operating instructions Before Requesting Help, Problem Remedy

Page 39

Before Requesting Help

Problem	Remedy

“Out of range” is displayed	• You are too far from the base unit.
and an alarm tone sounds.	Move closer and try again.
	• Place the handset on the base unit and
	try again.
	• Plug in the AC adaptor.
	• Extend the antennas fully.

The unit does not work.	• Check the settings (p. 8–10).
	• Charge the battery fully (p. 9).
	• Clean the charge contacts and charge
	again (p. 10).
	• Install the battery properly (p. 9).
	• Place the handset on the base unit and
	unplug the AC adaptor to reset.
	Plug in, and try again.
	• Re-install the handset battery within
	3 minutes to avoid memory loss and
	place the handset on the base unit.
	Then try again.
	• This unit is not designed to be used
	with rotary (pulse dialling) services.

Static, sound cuts in/out, fades. Interference from other electrical units.

•Locate the handset and the base unit away from other electrical appliances (p. 3).

•Move closer to the base unit.

•Extend the antennas fully.

•Press (EXIT/CH) to select a clearer channel.

The handset does not ring. • The ringer volume is set to OFF. Set to HIGH or LOW (p. 12).

The handset display is blank			• Charge the battery fully (p. 9).
even after pressing	,	,

or OK.

Useful Information

39

Image 39

Contents Caller ID Compatible Charge the battery for about 10 hours before initial useAccessories included Before Initial UseFor your future reference Radio waves. For maximum distance and noise-free operation, Battery ChargeFor Best Performance Base Unit LocationContents Location of Controls HandsetBase unit 0211115555 Display0266667777 Connections SettingsInstalling the Battery in the Handset Battery strengthDisplay prompt Battery strength Battery information Operation Approx. battery lifeRecharge Make sure that the unit is in the standby mode Programmable FunctionsDuring programming Selecting the Ringer Volume To turn the ringer OFF, pressTo turn the ringer ON, press or Setting the Auto Talk Feature Making Calls To redial the last number dialledIf noise interferes with the conversation Backlit handset keypad To select the receiver volumeTo dial after confirming the entered number To redial after confirming the last number dialledCaller ID Service Answering CallsOr # Any Key Talk How caller information is displayed when a call is received Private name displayFor New Zealand Users Viewing the Caller List Using the Caller ListDisplay meaning Ex. When you search from the most recent callTo return to the previous caller To exit the Caller ListCalling Back from the Caller List 0234567890Editing the Caller’s Phone Number Storing Caller List Information in the Directory Erasing Caller List Information To erase a specific caller from the Caller ListTo erase all entries in the Caller List Storing Names and Numbers in the Directory Using the DirectoryWhile the arrow points to Save Steps for Entering Names and Symbols If you make a mistake while entering a nameNumber of times key is pressed Keys For example, to enter Tom Jones Finding Items in the Directory Keys Index To search for a name by initialDialling from the Directory 4567890To return to the standby mode, press EXIT/CH Erasing an Item from the Directory Call Waiting and Caller ID Compatible Special FeaturesHow to Use the Pause Button For Call Waiting Service Users in New ZealandSelecting the recall time Recall ButtonFor Australia Users Battery Replacement Wall Template Wall MountingAdding Another Phone Before Requesting Help Problem RemedyBefore Requesting Help For New Zealand Customers Placement Safety InstructionsSafety Installations EnvironmentUseful Information Installation Important InformationInstructions to customer For Australia only Service difficulties For New Zealand Users Only Important InformationPage PQQX12819ZA-BM WM0800ST0