Panasonic KX-TCD410E Battery Charge, Battery Life, Fully charged, Display icon

Page 5

Setting up

Battery Charge

At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. Please charge the batteries for about 7 hours before initial use. During charging, the battery icon is as shown below.

Fully charged	During charging
(Flashing)
Display icon	Battery strength
	High
	Medium
	Low
	Needs to be
	charged

The handset which power is off will be turned on automatically when it is placed on the base unit.

In normal use, the handset and the base unit should be powered on at all times.

Battery Life

Battery life is dependent on use and conditions but in general when using fully charged Ni-MH batteries (700 mAh): Talk time: 10hrs approx.

Standby time: 120hrs approx.

When using Ni-Cd batteries (250 mAh): Talk time: 4hrs approx.

Standby time: 40hrs approx. (Times indicated are for peak performance)

The batteries reach peak performance after several full charge/discharge cycles. The batteries cannot be overcharged unless they are repeatedly removed and replaced.

If battery life is shortened then please check that battery and charge terminals are clean.

For maximum battery life, it is recommended that the handset is not

recharged until battery icon flashes .

Preparation

Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333

5

Image 5

Contents Operating Instructions Contents 08700 100 076 Monday Friday 900am 530pm Accessories included Before Initial Use Safety Caution Battery CautionImportant Information EnvironmentConnection Setting upBattery Installation Battery Life Battery ChargeFully charged Display iconSelecting the Battery Type Symbols Used in This Operating InstructionsReplacing the Batteries Please use only Panasonic P03PNi-MH or P03HNi-Cd batteriesHandset Display Location of ControlsHandset Base unitWall Mounting Power On/Off Using the TelephoneSetting the Clock/Date Making a CallRedialling Making CallsEditing the Dialled Number in the Redial List Clearing One/All Dialled Items in the Redial ListCaller ID Display Caller ID ServiceCaller ID Calling Back Caller ID ListEditing the Received Number in the Caller List Clearing One/All Received Items in the Caller ListAnswering Calls Receiver VolumeAuto Talk Temporary Bell OffStoring a Caller Information PhonebookNumber Editing a Caller InformationClearing a Caller Information Dialling with the PhonebookSave TEL NO.*2 Phone Number *1 NameRegistering a Phone Number as a Hot Key Hot KeyDialling with Hot Key Clearing the Hot Key RegistrationTime Alarm Handset SettingsSetting Time Alarm On/Off Before programming, please follow steps 1 toRinger Option Setting the Ringer VolumeDisplay Option Selecting the Standby Mode DisplayTone Option Call Option Selecting the Talk Mode DisplayCall BAR On/Off 4Handset-digitPIN*1Setting the Direct Call On/Off Setting the Direct Call NumberOther Options Current 4-digit New 4-digitKey Lock Recall FeatureDialling Pause for PBX line/long distance service users Digit Base Handset Number Unit PIN*1 Base Unit SetingsBase Unit Settings Handset Initial Settings Function Initial SettingsReset Handset Digit Base Unit PIN*1 Reset Base Unit SettingsBase Unit Initial Settings Function Multi-unit User Operation Cancelling a Handset Cancelling a Base UnitDigit Handset PIN *1 Digit Base Handset NumberSetting the Selected then All Handsets Mode Ringer Mode Selection Setting the All Handsets ModeSetting the Selected Handsets Mode Handset Numbers *2 Base Unit Selection Transferring a Call to Another Handset/Conference Call IntercomIntercom between Handsets Before Requesting Help Problem Possible cause SolutionBefore Requesting Help Technical Information SpecificationsPIN IndexPanasonic Business Systems U.K GuaranteePage Page PQQX13445YA D0303NR1033 For your future referenceSales Department Panasonic Business Systems U.K