Panasonic KX-TCD510AL operating instructions Service difficulties

Page 7

Important Information

If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased or to an Authorised Service Centre.

Service difficulties

If at any time a fault occurs on your telephone service carry out the following checks before you call for service:

Disconnect the Permitted Attachment and try using the service with the normal telephone.

If the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

If when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modified in any way without permission.

WARNING

This cordless telephone system does not incorporate provision for secrecy of conversations. Appropriately tuned radio equipment and other cordless telephone systems in close proximity may be used by a third party to monitor and possibly interrupt conversations in progress when this system is on radio operation.

Preparation

7

Image 7 Contents
Model No. KX-TCD510AL ContentsBefore Initial Use Features Preparation Accessories specific to product type Location Battery CautionImportant Information EnvironmentInstructions to customer InstallationService difficulties Phonebook How to Use the Handset Soft KeysLocation of Controls HandsetRussian Meanings of Icons above Soft KeysBase Unit IconPress Right Soft KEY Meanings of Symbols and Operations of KeysMeaning Press JoystickDisplay Icons DisplayMain Menu Display Connection Setting upBattery Installation Battery ChargeNi-Cd Batteries typical 250 mAh Battery InformationReplacing Batteries Ni-MH Batteries typical 700 mAh Operation Operating TimeSelecting the Display Language Power ON/OFFPower on Power OFFTo Select 12/24 Hour Clock Setting the Date and TimeSetting Handset TimeAuto Talk Using the TelephoneMaking a Call Answering a CallTo Mute To Return to the Conversation Press Left Soft Receiver or Headset Receiver/Speaker VolumeMuting Your Conversation To Return to ReceiverHandset Locator/Paging Key LockDialling the Last Number Dialled Recall FeatureRedialling Dialling with the Redial List Press Right Soft KEYPress Right Soft Dialling Pause for PBX line/long distance service usersUsing Caller ID Type Call Waiting and Caller ID CompatibleMaking a Call from the Caller ID List Caller ID ServiceStandby Mode Display Caller IDJoystick to call List MenuCaller ID List Menu Editing the Received Number for CallingDeleting One/All Caller ID Items Redial List MenuDeleting One/All Redial Items Editing the Dialled Number for CallingGreen Orange Red Using the PhonebookPrivate Category Feature Audible Caller ID FeatureHandset Phonebook Press Left Soft Press Joystick Storing Caller InformationPhonebook , then Base Unit PhonebookRecording Keys Operations Selecting the Input ModeExample Alphabet Mode Entering Names/CharactersPress Left Soft KEY again Searching for a Name by Initial Finding Items in the PhonebookSoft KEY again Searching by Index Search ModeDialling from the Phonebook Press Left Soft KEY Press Right SoftHandset Phonebook Press Left Soft Editing Caller InformationPress Left Soft KEY again Deleting Caller InformationBase Unit Phonebook Press Left Soft Select Start RecordingDialling with a Hot Key Hot KeysRegistering a Phone Number as a Hot Key Press Left Soft Hot KeyHandset Settings Menu Chart Settings Menu Chart1st Menu 2nd Menu 3rd Menu Other Option Change Base PIN Reset Base Base Unit Settings Menu ChartDaily Handset SettingsMemo Alarm Setting the Alarm Mode Once or DailyTo Stop the Alarm Setting the Alarm OffRinger No Ringer Pattern or Name Ringer OptionsSelecting the Ringer Pattern for Private Ring Setting the Ringer VolumePress Joystick to Setting the Handset Key Tone ON/OFFSelecting the Standby Mode Display Display OptionsSetting the Private Colour Selecting the Talk Mode DisplayChanging the Private Category Name Select Direct Call Setting the Direct Call NumberCall Options Call Bar ON/OFFChanging the Handset PIN Personal Identification Number Setting the Direct Call ON/OFFOther Options Select Direct On/OffChanging the Handset Name Setting Auto Talk ON/OFFSetting the Battery Type Resetting the Handset SettingsOFF Handset Initial Settings FunctionsSetting the Base Unit Ringer Volume Base Unit SettingsJoystick or Select Emergency Call Setting the Emergency CallsSelecting the Recall Time Selecting the Pause TimeCode Call RestrictionRestricted PressJOYSTICK Storing Your Area CodePIN Resetting the Base Unit SettingsChanging the Base Unit PIN Personal Identification Number Select Change BaseBase Unit Initial Settings Functions Operating Additional Handsets Multi-Unit User OperationsOperating Additional Base Units Handset Registration to a Base Unit Select Cancel Base Cancelling a HandsetSelect Cancel Handset Cancelling a Base UnitHandset For example, when Handset 1 calls HandsetBase Unit Selection Intercom Between HandsetsTransferring a Call to Another Handset For example, when Handset 1 transfers a call to HandsetPress Intercom Select Send Phonebook Phonebook CopyCopying an Item Handset 1 Receiver Handset 2 Sender Select Recv PhonebookHandset 1 Receiver Handset 2 Sender Press Joystick Copying All ItemsSelect Copy All Items Walkie-Talkie Setting the Walkie-Talkie ModeWhen Group was selected Talking in Walkie-Talkie Mode Turning the Walkie-Talkie Mode On/OffTo Set OFF Press Joystick Answering SystemAnswering System ON/OFF To Set on Press JoystickSelecting the Caller’s Recording Time Greeting MessageRecording Your Own Greeting Message Press Joystick OGMDeleting Your Own Greeting Message Press Joystick Playing back Pre-Recorded/Your Own Greeting MessageOperation Message Rings Toll Saver When set to AutoSelecting the Number of Rings Select NumberIncoming/Memo Messages All Selecting the Receiver/Speaker Volume During PlaybackDeleting One Incoming/Memo Message Deleting All Incoming/Memo Messages Press JoystickOperation TAM Monitor Function ON/OFFEditing a Number for Calling Press Joystick Press Joystick , Talk or SpeakerphoneOr Play All Msg Answering System Direct CommandRemote Operation from a Touch Tone Phone Setting the Remote Code OFFTurnig on the Answering System Remotely Command Function Direct Remote CommandsSummary of Remote Operation Words in mean a voice guidance Press Voice MenuRecording Your Telephone Conversation Recording a Memo MessageMemo Wall Mounting Using the Belt ClipConnecting the Optional Optional HeadsetBefore Requesting Help Problem Possible cause Solution To Greeting Only Limit Answering System Problem Possible cause SolutionCharacter Table PIN IndexTechnical Information SpecificationsConnections Sales Department For your future referencePQQX13796ZA D0703-0