4Things You Should Know
4-E Wall Mounting
This unit can be mounted on a wall phone plate.
4-F Base Unit Location/Noise
Calls are transmitted between the base unit and handset using
1
2
Press the tabs in the direction of the arrows (#), then remove the wall mounting adaptor ($).
Connect the AC adaptor.
•Fasten the AC adaptor cord to prevent it from being disconnected.
1 1
2
Hook
To
Power
Outlet
wireless radio waves. For maximum distance and
Away from electrical appliances | In a HIGH and CENTRAL |
such as a TV, personal computer | location with no obstructions |
or another cordless phone. | such as walls. |
Raise the antenna.
Note:
•If you use the handset near a microwave oven which is being used, noise may be heard from the receiver or the speaker. Move away from the microwave oven and closer to the base unit.
•If you use the handset near another cordless phone’s base unit, noise may be heard. Move away from the other cordless phone’s base unit and closer to your base unit.
3Tuck the telephone line cord inside the wall
mounting adaptor, then push the adaptor in the direction of the arrows (# and $) while pressing the tabs.
•The word “UP WALL” should face upward.
4Connect the telephone line cord. Mount the unit,
then slide it down.
• Raise the antenna.
2
1
4-G Specifications
■Base unit
Power Supply:AC Adaptor (120 V AC, 60 Hz)
Power Consumption: | Standby: Approx. 2.1 W |
| Maximum: Approx. 5.0 W |
Frequency: | 2.4 |
Dimensions (H x W x D): | Approx. 124 mm x 155 mm x 174 mm |
Mass (Weight): | (4 7⁄8" x 6 3⁄32" x 6 27⁄32") |
Approx. 330 g (0.73 lb.) |
■Handset
Power Supply:Ni-MH battery (3.6 V, 830 mAh)
Frequency:2.4
Dimensions (H x W x D): Approx. 208 mm x 52 mm x 39 mm
| (8 3⁄ " x 2 | 1⁄ " x 1 | 17⁄ ") |
Mass (Weight): | 16 | 16 | 32 |
Approx. 190 g (0.42 lb.) |
| ||
Security Codes: | 1,000,000 |
|
|
■ Dialing Mode: | Tone (DTMF)/Pulse |
|
■Operating Environment:
5To charge the handset battery: Place the handset on the base unit.
•The unit beeps once and
the CHARGE indicator lights.
For assistance, please call: