Panasonic KXNT321 manual Wall Mounting, Locking the Handset Hook

Wall Mounting

1.Remove the stand if it is attached. For information on removing the stand, refer to page 11.

2.Attach the wall mounting adaptor

as shown.

• Make sure the cables are not pinched by the wall mounting adaptor. When running the cables from the top of the unit, look through the opening in the wall mounting adaptor to confirm that the cables are not being pinched.

• Slide the wall mounting adaptor in the direction indicated until it locks into place.

3.Drive the 2 screws into the wall
either 83 mm (3-1/4 in) or 100
mm (3-15/16 in) apart, and
mount the unit on the wall.
•	You can find a wall mounting	83 mm
	template on page 19.
		(3-1/4 in)
•	Make sure that the wall that the
		100 mm
	unit will be attached to is strong	(3-15/16 in)
	enough to support the unit
	(approx. 1.5 kg [3.31 lb]).

•	Make sure the cables are securely	Washer
	fastened to the wall.
		Drive the screw
•	When this unit is no longer in use,
	make sure to detach it from the	to this point.
	wall.

Locking the Handset Hook

Pull down the handset hook until it locks to prevent the handset from falling off the handset cradle when the unit is mounted to a wall or set at a high angle. To temporarily place the handset down during a conversation, hook it over the top edge of the unit as shown.

Document Version 2008-05 13