Connection
<Back view> | To a Switching Hub. |
To a PC.
Optional AC adaptor (not included).
Clamp
AC adaptor
Headset
Recommended:
For extra orders for the accessories, call
PC connection
•Use a straight CAT 5 (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or less.
•For further information on the connection to a PC, refer to the documentation provided for the PBX.
Switching Hub connection
•Use a straight CAT 5 (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or less.
AC adaptor
•Use a Panasonic AC adaptor
•The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is located near the unit and is easily accessible.
CAUTION:
When connecting cables
•Ensure that the Ethernet cables and the AC adaptor cord are clamped to prevent damage to the connectors.
•Cables may be routed either upwards or downwards by using the appropriate cable clamp located on the back of the unit.
When connecting a headset and AC adaptor
•Ensure that the headset cord and the AC adaptor cord are wound around the hook to prevent damage to the connectors.
10 | Document Version |