Display mode
You can select to display either a single item or multiple items on one screen at a time for the following features:
–menu list, phonebook list, caller list, redial list, message list, and call block list
–handset top menu icons in function menu
The following icons are shown when you press down on the center of the joystick in standby mode.
Icon | Feature |
W | Caller list |
|
|
s | Answering device |
|
|
# | V.M. access |
|
|
x | Intercom |
|
|
" | Initial setting |
|
|
! | Customer support |
|
|
The display mode can be switched temporarily or set by programming.
NSwitching temporarily:
You can temporarily switch the display mode as follows by pressing the right soft key shown when viewing the lists or selecting menu icons:
–{MULTI}: Multiple entries/all menu icons are shown on one screen at a time.
–{SINGLE}: An entry/a menu icon is shown on one screen in large characters at a time.
Note:
LWhen “Multi items” is selected as the display mode, you can switch the screen to confirm the detailed information by pressing {SINGLE}.
NBy programming:
You can set the unit to always show a single item or multiple items beforehand by selecting “Single item” or “Multi items” as the display mode setting.
Select the desired setting:
–“Multi items”: Multiple entries/all menu icons are shown on one screen at a time.
–“Single item”: An entry/a menu icon is shown on one screen in large
characters at a time.
The default setting is “Multi items”.
1{MENU} (center of joystick) i
{#}{1}{9}{2}
2{V}/{^}: Select the desired setting.i {SAVE}
3{OFF}
Note:
LWhen {MULTI} or “Multi items” is selected as the display mode, you can move screens by pushing the joystick right or left, without scrolling down or up through the list:
–Push the joystick right to go to the next screen.
–Push the joystick left to return to the previous screen.
Listening to messages using the handset
Listening to messages from the message list
You can select the item to play back.
1{MENU} (center of joystick) i
{#}{3}{2}{9}
2{V}/{^}: Select the desired item from the message list. i {PLAY}
LYou can erase the selected message as follows: {ERASE}
i{V}/{^}: “Yes” i {SELECT}
3When finished, press {OFF}.
Note:
LIf the item has already been heard, “Q” is displayed, even if it was heard using another handset.
– 5 –