KX-TC2000NZB / KX-TC2000N ZW / KX-TC2000NZF
13 RF SPECIFICATION
13.1. | Base Unit |
|
|
| |
|
|
|
|
|
|
|
| Item | Value | Refer to | Remarks |
| TX Frequency | 30.175MHz ± 100Hz | ADJUSTMENTS (BASE UNIT) (C) | at CH3 | |
| TX Power | more than 1mW | ADJUSTMENTS (BASE UNIT) (D) | at CH3 | |
| Line Modulation factor | 2.5 kHz~3.1 kHz | ADJUSTMENTS (BASE UNIT) (G) |
| |
| Data Modulation factor | 4.5 kHz~7.5 kHz | — |
| |
| Line Output level | more than 120mV | — |
| |
| *: Refer to Adjustment (P.26). |
|
|
| |
13.2. | Handset |
|
|
| |
|
|
|
|
|
|
|
| Item | Value | Refer to | Remarks |
| TX Frequency | 39.875 MHz ± 0.1kHz | ADJUSTMENTS (HANDSET) (D) | at CH3 | |
| TX Power | more than 1mW | ADJUSTMENTS (HANDSET) (E) | at CH3 (Antenna | |
|
|
|
|
| soldering point 50Ω |
|
|
|
|
| Load) |
| Data Modulation factor | 5.0 kHz~6.0 kHz | ADJUSTMENTS (HANDSET) (J) | at CH3 | |
| MIC Modulation factor | 2.9 kHz/dev~3.8 kHz/dev | ADJUSTMENTS (HANDSET) (I) | at CH3 (MIC terminal | |
|
|
|
|
| 2.4mV Input) |
| SP Output level | more than 30mV | — |
| |
**: Refer to Adjustment (P.29).
14 HOW TO CHECK THE HANDSET SPEAKER
1.Prepare the digital voltmeter, and set the selector knob to ohm meter.
2.Put the probes at the speaker terminals as shown below.
32