Chapter 3. Installation | Section 520 - TSAPI |
|
|
Novell loader will advise of unresolved external symbols and Panadrvr will not be loaded.
Loading Panadrvr
Before Panadrvr can be loaded, Telephony Services must be installed and running and a client logged into the server as Administrator or Supervisor. During the installation process, Panadrvr is copied to the system directory of the server.
The Panadrvr NLM can be loaded manually by entering it on the command line, or automatically by adding the load command to the autoexec.ncf file.
In either case, the syntax for the load command is as follows:
load Panadrvr <options>
Load Options
Panadrvr has several load time options. To display a list of these options, type:
load Panadrvr?
Options must be separated from each other by a space, as shown in the following example.
load Panadrvr security=2 api=2 baud=19200 setmwi=100 port=1
Notes:
•It is recommended that the api, baud, and security options be specified each time Panadrvr is loaded. If Panadrvr is to be loaded automatically, add these options to the load command line in autoexec.ncf.
•Command line options specified after the configuration file is read override any options specified in the configuration file.
Option: api=
Range: 1 or 2
Default: 1
Runtime modifiable: No
Purpose: Specifies which DBS API port is set up for Telephony Services.
This must match the DBS setting.
10 | Issued April 2000 |