Panasonic KX-TGH264 manual Pairing a Bluetooth cellular phone Handset, Your cellular phone, Off

Page 4

Link to cell

Pairing a Bluetooth cellular phone

1Handset:

For CELL 1: {MENU} (right soft key) (6241

For CELL 2: {MENU} (right soft key) (6242

L After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.

2Your cellular phone:

While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.

L Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: 0000). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.

3Handset:

Wait until a long beep sounds.

L It may take more than 10 seconds to complete pairing.

L When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.

4{OFF}

Note:

L Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone’s operating instructions.

Base unit: CELL indicators

Status

Meaning

 

 

On

A cellular phone is connected. Ready to make/receive cellular

 

calls.

Flashing

The cellular line is in use.

 

Phonebook entries are being copied from a cellular phone.

 

The base unit is searching for the paired cellular phone.

 

The base unit is pairing a cellular phone.

 

A cellular call is put on hold.

 

 

Flashing rapidly

A cellular call is being received.

 

 

Light off

A cellular phone is not paired to the base unit.

 

A cellular phone is not connected to the base unit.

 

 

Handset: Link to cell display items

 

A cellular line is in use.*1

 

L When flashing: The cellular call is put on hold.

 

L When flashing rapidly: A cellular call is being received.

 

*1

Corresponding cellular line(s) is(are) indicated next to the item.

 

 

 

A cellular phone is connected.*1 Ready to make/receive cellular calls.

 

L When turned off: A cellular phone is not connected to the base unit.

 

*1

Corresponding cellular line(s) is(are) indicated next to the item.

uv

A cellular call is being done on that line.

 

The cellular line is selected for the setting.

 

 

 

– 4 –

Image 4
Contents Base unit ConnectionsCharger Operating tips Battery installation/Battery chargingCharge for about 7 hours Link to cell Date and time HandsetTrademarks Pairing a Bluetooth cellular phone Handset Base unit Cell indicators Status MeaningYour cellular phone OFFConnecting/disconnecting the cellular phone manually To connect/disconnectBasic operations Making/Answering calls HandsetTo make a cellular call To make a landline callPhonebook Handset Name s Select10r Save s Select sOFF Answering system for the landline Base unitUsing Bluetooth devices When Select mode menu is displayedHandset To copy from paired cellular phones To copy from other cellular phones not pairedPairing a headset to the base unit Your headset Operating a Bluetooth wireless headset using a landlineSwitching between the base unit and your headset To switch to your headsetFrequently asked questions Question Cause/solution
Related manuals
Manual 88 pages 55.66 Kb