Using Bluetooth devices
Using a Bluetooth wireless headset (optional) for landline calls
By pairing a Bluetooth headset to the base unit, you can have a
L Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line).
Pairing a headset to the base unit
1Your headset:
Set your headset to pairing mode.
L Refer to your headset operating instructions.
2Handset:
{MENU} (right soft key) (621
1
2
1 Pair using the handset.
2Paring
3If your headset PIN is “0000”, go to step 4.
If your headset PIN is other than “0000”, press {CLEAR}, then enter your headset PIN.
L Typically, default PIN is “0000”. Refer to the headset operating instructions.
4Press {OK}, then wait until a long beep sounds. s{OFF}
L When the HEADSET indicator on the base unit lights up, you are ready to use the headset.
Operating a Bluetooth wireless headset using a landline
Refer to your headset operating instructions for headset operations. N Answering landline calls with your headset
To answer a landline call, turn on your headset referring to your headset operating instructions. When you finish talking, turn off your headset referring to your headset operating instructions. L If you cannot hang up the call using your headset, press {P} (STOP) on the base unit.
N Switching between the base unit and your headset
You can switch between the base unit and your headset while listening to messages recorded on the base unit answering system.
L You can only switch from the base unit to your headset.
To switch to your headset:
Turn on the headset referring to your headset operating instructions.
– 9 –