Panasonic KX-TG1855AL, KX-TG1857AL Direct command operation using the handset, Remote operation

Answering System Features

4{^}/{V}: “Erase All” i {>}

5{^}/{V}: “Yes” i {>} i {ih}

Calling back (Caller ID subscribers only)

If caller information was received for the call, you can call the caller back while listening to a message.

1Press {j/OK} during playback.

2{^}/{V}: “Call Back” i {>}

Editing the number before calling back

1Press {j/OK} during playback.

2{^}/{V}: “Edit and Call” i

{>}

3Edit the number. i {C}

Direct command operation using the handset

You can operate the answering system by pressing dial keys, rather than navigating through the menus.

To use the following commands: {j/OK} i

{^}/{V}: “Answer System” i {>}

Key	Operation
{1}	Repeat message (during
	playback)*1
{2}	Skip message (during
	playback)
{3}	Enter the “Settings”
	menu
{4}	Play new messages
{5}	Play all messages
{6}	Play greeting message

Key	Operation
{7}{6}	Record greeting
	message
{8}	Turn answering system
	on
{9}	Stop (recording,
	playback)
{0}	Turn answering system
	off
{*}{4}	Erase currently playing
	message
{*}{5}	Erase all messages
{*}{6}	Erase greeting message

*1 If pressed within the first 5 seconds of a message, the previous message will be played.

Remote operation

Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The unit’s voice guidance will prompt you to press certain dial keys to perform different operations.

Important:

L In order to operate the answering system remotely, you must first turn on remote operation by setting a remote access code. This code must be entered each time you operate the answering system remotely.

Turning remote operation on

A3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorised parties from listening to your messages remotely.

27