Pioneer AVIC-Z150BH, AVIC-X950BH manual

Page 4

4.Insert the SD Card or microSD Card into your AVIC-Z150BH or AVIC-X950BH.

•The system will automatically recognize the firmware update file, reboot, and start the update process within a minute.

•If the AV Source screen was not set to [OFF] prior to inserting the SD card or microSD card, you will only see a black screen and the above update screen will not be visible. If this is the case, do not turn off power or eject the SD Card or microSD Card for at least 5 minutes as the update process may be in process. Failure to heed this warning may result in serious damage to your Pioneer GPS Navigation system.

•The initial update process will take approximately 2 to 3 minutes to complete. The AVIC-Z150BH or AVIC-X950BH will automatically reboot and the “Program forced write” screen will appear:

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Procedure Downloading the firmware update filesLocate and decompress the downloaded file Updating the firmware on your AVIC-Z150BH or AVIC-X950BH SD Card or microSD Card Device RequirementsPage Program forced write System uCom Write screen will appear Confirm that the uCom version shows Verifying System Application Version Page Select Yes Screen will then confirm your AppRadio Mode selection Is this device equipped with a Digital AV/VGA Connector?Next screen will ask Is this Android? Press OK Connecting Your iPhone with Lightning Connector
Top Page Image Contents