Panasonic KX-TS560MX Chain dial, Finding and calling a phonebook entry, Editing entries

Phonebook

Finding and calling a phonebook entry

Scrolling through all entries

1Press {2} or {1} to enter the phonebook list.

2{4} / {3}: Select the desired entry.

≥Item with # at the beginning will be displayed with first priority if dial lock (page 18) or call restriction (page 14) is turned on.

3π KX-TS560MX

Lift the handset to start calling.

π KX-TS580MX

Lift the handset or press {SP-PHONE} to start calling.

Searching by first character (alphabetically)

1Press {2} or {1} to enter the phonebook list.

2Press the dial key ({0}j{9}, {£} or

{# }) which contains the character you are searching for (page 19).

≥Press the same dial key repeatedly to display the first entry corresponding to each character located on that dial key.

≥If there is no entry corresponding to the character you selected, the next entry is displayed.

3{4} / {3}: Scroll through the phonebook if necessary.

4π KX-TS560MX

Lift the handset to start calling.

π KX-TS580MX

Lift the handset or press {SP-PHONE} to start calling.

Editing entries

1Press {2} or {1} to enter the phonebook list.

2{4} / {3}: Select the desired entry >

{ENTER}

3Edit the name if necessary

(15 characters max. : page 19) >

{ENTER}

4Edit the phone number if necessary (32 digits max) > {ENTER} > {EXIT}

Erasing entries

1Press {2} or {1} to enter the phonebook list.

2{4} / {3}: Select the desired entry >

{CLEAR} > {ENTER} > {EXIT}

Chain dial

This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually.

1During an outside call, press {2} or {1}.

2{4} / {3}: Select the desired entry >

{ENTER}

Note:

≥When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press {PAUSE} to add pauses after the number and PIN as necessary (page 16).

≥If you have rotary/pulse service, you need to press {£} before pressing {2} or {1} in step 1 to change the dialing mode temporarily to tone.

20