Panasonic KX-TS560MX Dialing mode, Storing your area code, Example 092 0 9, Clear Enter Exit

≥ Each time you press {#}, the selection will change on the display.

Example: 9:30PM

{0} {9} {3} {0}> Press {#} until “9:30PM” is displayed.

7 {ENTER}

8 Enter the current date and month by selecting 2 digits for each. Example: 15 July

{1} {5} {0} {7}

9 {ENTER} >{EXIT}

≥ If the date and time entered are wrong, “ERROR” will be displayed and you cannot continue with the setting. Enter the correct date and time.

12

(Blank display)

24-hour clock

PM

PM

AM

Option

AM

Display

{ENTER}

5

{0} {8}

≥ You can set the year 2000 to 2099.

3 {ENTER}

4 Enter the current hour and minute by selecting 2 digits for each.

Enter the current year by selecting 2 digits.

Example: 2008

2

Preparation

Setting up the unit before use

Date and time

1 {FUNCTION} > {4} / {3}: “SET CLOCK ?” > {ENTER}

≥If numbers between 0000 and 0059, or 1300 and 2359 are entered, the time will automatically set using the 24-hour clock. Skip steps 6 and 7, and go to step 8.

6Press {#} to select “AM”, “PM” or 24-hour clock.

For Caller ID service users (page 21) If a time display service is available with the Caller ID service:

≥The Caller ID information will re-set the clock

after the ring if:

s the adjusted time and/or date is incorrect. s the time adjustment set to ON.

Dialing mode

If you cannot make calls, change this setting according to your telephone line service. The default setting is “TONE”.

“TONE”: For tone dial service.

“PULSE”: For rotary/pulse dial service.

1{FUNCTION} > {4} / {3}: “SET DIAL MODE ?” > {ENTER}

2{4} / {3}: Select the desired setting >

{ENTER} > {EXIT}

Storing your area code

We recommend storing your area code before using Caller ID (page 21). Calls from the same area will be recorded in the caller list without the area code. You do not have to remove it before calling back the caller.

≥To store the caller’s information in the phonebook, you may need to remove the area code because same area code would be appeared automatically while storing.

1{FUNCTION} > {4} / {3}: “SET AREA CODE ?” > {ENTER}

2Enter your area code (8 digits max.).

Example: 092 {0} {9} {2}

≥To correct a digit, press {CLEAR}. Enter the correct number.

3{ENTER} >{EXIT}

To erase your area code

1{FUNCTION} > {4} / {3}: “SET AREA CODE ?” > {ENTER}

2{CLEAR} > {ENTER} > {EXIT}