Installation accessories
3 protective shields
to prevent scratches to the chimney during installation.
1 vent collar
for use with 6" (150 mm) exhaust ducting
1 reducing collar
for use with 5" (125 mm) exhaust ducting.
2 protective strips for chimney mounting
Upper retaining plate secures the chimney extension
Middle retaining plate for additional stability of the chimney
Lower retaining plate secures the canopy and motor assembly.
Installation kit for recirculation mode; contains diverter, hose and hose clips
(optional accessory)
1lever for dismantling the chimney
Installation instruction diagram
8 large headed screws 5 x 40 mm
for securing the retaining plates and the canopy
(S8 wall anchors included in the packaging are not for use in USA)
2 M 6 locking nuts for securing the unit
CAUTION
To avoid risk of hand or other injury, avoid contact with sharp edges during the assembly and installation process.
27
