Panasonic KX-DT390 manual PSQX4707ZA-UU A KK0309YH0 M, Wall Mounting Template, Copyright

Page 8
WALL MOUNTING TEMPLATE

One screw here

157 mm (6-1/5 in)

One screw here

 

 

 

 

100 mm (3-15/16 in) 83 mm (3-1/4 in) for DPT

WALL MOUNTING TEMPLATE

1.Drive the screws into the wall as indicated.

Note:

If the KX-DT390 is mounted beside a DPT, leave 157 mm (6-1/5 in) of space between the 2 screws for the DPT and the 2 screws for the KX- DT390, as indicated above. This space is abbreviated in this template and must be measured.

2.Hook the unit onto the screw heads.

Panasonic Consumer Electronics Company,

Division of Panasonic Corporation of North

America

One Panasonic Way Secaucus, New Jersey 07094

http://www.panasonic.com/csd

Copyright:

This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.

© Panasonic Communications Co., Ltd. 2009

for KX-DT390 DSS Console (with 60 Keys) 83 mm (3-1/4 in) 100 mm (3-15/16 in)

One screw at either point

One screw at either point

PSQX4707ZA-UU (A) KK0309YH0 (M)

Image 8
Contents Quick Reference Guide Accessories includedDigital DSS Console Operation Board Angle Adjustment Location of ControlsConnection To raise2. Attach the plate with the 4 screws included Attaching a DPTTo lower Wall Mounting Take special care to follow the safety suggestions listed below Installation EnvironmentPlacement Important InformationWhen you ship the product Product serviceImportant Safety Instructions SAVE THESE INSTRUCTION FCC InformationCustomer Information PSQX4707ZA-UU A KK0309YH0 M WALL MOUNTING TEMPLATEDivision of Panasonic Corporation of North America Copyright