Cisco Systems SPA3102, SPA2102, WRP400 manual This field is not available with the PAP2T. The Global

ATA Voice Field Reference

PSTN Line page (SPA3102)

B

SIP Remote-Party-	To use the Remote-Party-ID header instead of the From
ID	header, select yes. Otherwise, select no.
	The default is yes.
SIP GUID	This field is not available with the PAP2T. The Global
	Unique ID is generated for each line for each device. When
	it is enabled, the ATA device adds a GUID header in the SIP
	request. The GUID is generated the first time the unit boots
	up and stays with the unit through rebooting and even
	factory reset. This feature was requested by Bell Canada
	(Nortel) to limit the registration of SIP accounts.
	The default is yes.
SIP Debug Option	SIP messages are received at or sent from the proxy listen
	port. This feature controls which SIP messages to log.
	Choices are as follows:
	• none—No logging.
	• 1-line—Logs the start-line only for all messages.
	• 1-line excl. OPT—Logs the start-line only for all messages
	except OPTIONS requests/responses.
	• 1-line excl. NTFY—Logs the start-line only for all messages
	except NOTIFY requests/responses.
	• 1-line excl. REG—Logs the start-line only for all messages
	except REGISTER requests/responses.
	• 1-line excl. OPTNTFYREG—Logs the start-line only for all
	messages except OPTIONS, NOTIFY, and REGISTER
	requests/responses.
	• full—Logs all SIP messages in full text.
	• full excl. OPT—Logs all SIP messages in full text except
	OPTIONS requests/responses.
	• full excl. NTFY—Logs all SIP messages in full text except
	NOTIFY requests/responses.
	• full excl. REG—Logs all SIP messages in full text except
	REGISTER requests/responses.
	• full excl. OPTNTFYREG—Logs all SIP messages in full text
	except for OPTIONS, NOTIFY, and REGISTER requests/
	responses.
	The default is none.
RTP Log Intvl	The interval for the RTP log.

ATA Administration Guide 194