Useful Information
Wall mounting
The base unit can be mounted on a wall by changing the wall mounting adaptor’s position.
Note:
R Make sure that the wall and the fixing method are strong enough to support the weight of the unit.
Base unit
1 To remove the wall mounting adaptor, push |
down the release levers (A). Remove the |
adaptor (B). |
3Insert the lower tabs of the adaptor into the unit’s bottom slots (A), then insert by pushing down the levers of the adaptor into the upper slots (B).
R The words “UP WALL” should be facing up.
B 
B
A A
4Mount the unit on a wall then slide down to secure in place.
B B
A A
1 |
2 |
83 mm
(3 1/4 inches) or
102mm
(4 inches)
2A Turn the adaptor so that the words “UP WALL” are facing up.
B Tuck the telephone line cord inside the wall mounting adaptor.
C Connect the AC adaptor cord and telephone line cord.
Wall phone plate |
|
83 mm | 102 mm |
(31/4 inches) 1 | (4 inches) |
2 |
|
Hook
1
3
2
Charger
Drive the screws (not supplied) into the wall.
25.4 mm (1 inch)
Screws
Hooks
40 | For assistance, please visit http://www.panasonic.com/help |
