Programming
Programmable settings
You can customize the unit by programming the following features.
To access the features, there are 2 methods.
Base unit / Handset
n Scrolling through the display menus
1MMENUN
2Proceed with the operation for your unit.
Base unit: Press MCN, MDN, M
N, or M
N to select the desired main menu. a MSELECTN
Handset: Press MCN or MDN to select the desired main menu. a MSELECTN
3Press MCN or MDN to select the desired item from the next
4Press MCN or MDN to select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MEXITN on the base unit or MOFFN on the handset.
n Using the direct command code
1MMENUN a Enter the desired code. Example: Press MMENUN#110.
2Select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MEXITN on the base unit or MOFFN on the handset.
Note:
R In the following table, < > indicates the default settings.
R In the following table, 
indicates the reference page number.
R Display menu order and
Display the menu tree and direct command code table
n Base unit
Main menu: 
“Caller List”
Operation |
| Code |
|
Viewing the caller list. | #213 | 29 | |
Main menu: | “Phonebook” |
|
|
Operation
Viewing and erasing the phonebook entry.
Main menu: 
“Answer device”
Code
#280
18
Settings | Code |
| ||
Screen call | – | <On> | #310 | 31 |
|
| Off |
|
|
20 | For assistance, please visit http://www.panasonic.com/help |
