Programming

Call block (Caller ID subscribers only)

This feature allows the unit to reject calls when:

the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 26).

the unit receives a call without phone number (“Blocking incoming calls without phone number”, page 26).

When a call is received, the unit rings for a short time while the caller is being identified. If the phone number matches an entry in the call block list, the unit sends out a busy tone to the caller, and then disconnects the call.

Important:

R When the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list (page 29) with after the call is disconnected.

Storing unwanted callers

You can store up to 30 phone numbers in the call block list.

Important:

R We recommend storing 10 digits (including an area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked.

Handset

n From the caller list:

1MFN CID

2MbN: Select the entry to be blocked. R To edit the number, press MEDITN

repeatedly until the phone number is shown in the 10-digit format.

3MSAVEN

4MbN: Call blocka MSELECTN

5 MbN: Yesa MSELECTN

6Edit the phone number if necessary (24 digits max.).

7MSAVEN a MOFFN

n By entering phone numbers:

1MMENUN#217 a MADDN

2Enter the phone number (24 digits max.). R To erase a digit, press MCLEARN.

3MSAVEN a MOFFN

Blocking incoming calls without phone number

You can reject a call when no phone number is provided, such as a call just showing Out of

area.

Handset

1MMENUN#240

2MbN: Select the desired setting. a MSAVEN a MOFFN

Viewing/editing/erasing call block numbers

Handset

1MMENUN#217

2MbN: Select the desired entry. R To exit, press MOFFN.

3To edit a number:

MEDITN a Edit the phone number. a MSAVEN a MOFFN

To erase a number:

MERASEN a MbN: Yesa MSELECTN a

MOFFN

Note:

R When editing, press the desired dial key to add, MCLEARN to erase.

R When viewing, Block w/o numis displayed if the blocking incoming calls without phone number feature is turned on. To turn the feature off: MERASEN a MCN a MSAVEN a MOFFN

Registering a unit

Operating additional units

Additional handsets

Up to 6 handsets can be registered to the base unit.

Important:

R See page 4 for information on the available model.

26

For assistance, please visit http://www.panasonic.com/help

Page 26
Image 26
Panasonic KX-TG4772B Registering a unit, Call block Caller ID subscribers only, Operating additional units, Area