Registering a handset to the base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset is
not registered to the base unit, re-register the
handset.
1Handset:
MMENUN#130
2Base unit:
Press and hold MLOCATORN for about 5
seconds until the registration tone sounds.
RIf all registered handsets start ringing, press
MLOCATORN again to stop, then repeat this
step.
RThe next step must be completed within 90
seconds.
3Handset:
Press MOKN, then wait until a long beep
sounds.
Note:
RWhile registering, Base in registering
is displayed on all registered handsets.
RWhen you purchase an additional handset, refer
to the additional handset’s installation manual
for registration.
Deregistering a handset
A handset can cancel its own registration to the
base unit, or other handsets registered to the
same base unit. This allows the handset to end its
wireless connection with the system.
1MMENUN#131
RAll handsets registered to the base unit are
displayed.
2MbN: Select the handset you want to cancel.
a MSELECTN
3MbN: Yes a MSELECTN
4MOFFN
For assistance, please visit http://www.panasonic.com/help 27
Programming
TG477x(en-en)_1130_ver021.pdf 27 2011/11/30 15:57:55