Intercom/Locator
Intercom
Intercom calls can be made:
–between the base unit and a handset
–between handsets
Note:
R When paging unit(s), the paged unit(s) beeps for 1 minute.
R If you receive an outside call while talking on the intercom, you hear 2 tones.
–To answer the call with the base unit, place the corded handset on the cradle, then lift it again. If the speakerphone is used, press
–To answer the call with the handset, press MOFFN, then press M
N.
Making an intercom call
Base unit
1Press MINTERCOMN.
When 2 or more handsets are registered:
–To page a specific handset, enter the handset number.
–To page all handsets, press 0 or wait for a few seconds.
R Lift the corded handset if needed.
R To stop paging, press MINTERCOMN.
2When you finish talking, press MINTERCOMN or place the corded handset on the cradle.
Handset
1MMENUN a MINTN
2MbN: Select the desired unit. a MSELECTN R To stop paging, press MOFFN.
3When you finish talking, press MOFFN.
Answering an intercom call
Base unit
1Lift the corded handset or press MINTERCOMN to answer the page.
2When you finish talking, place the corded handset on the cradle or press MINTERCOMN.
Handset
1Press M
N to answer the page.
2When you finish talking, press MOFFN.
Handset locator
You can locate a misplaced handset by paging it.
1Base unit: Press MLOCATORN.
R All registered handsets beep for 1 minute.
2To stop paging:
Base unit:
Press MLOCATORN.
Handset:
Press M
N, then press MOFFN.
Transferring calls, conference calls
Outside calls can be transferred or a conference call with an outside party can be made:
–between the base unit and a handset
–between 2 handsets
Base unit
1During an outside call, press MINTERCOMN.
When 2 or more handsets are registered:
–To page a specific handset, enter the handset number.
–To page all handsets, press 0 or wait for a few seconds.
2Wait for the paged party to answer.
R If paged party does not answer, press MINTERCOMN to return to the outside call.
3To complete the transfer:
Place the corded handset on the cradle. R The outside call is being routed to the
handset.
To establish a conference call: Press MCONFN.
R To leave the conference, place the corded handset on the cradle. The other 2 parties can continue the conversation.
R To put the outside call on hold, press MHOLDN. To resume the conference, press
MCONFN.
Handset
1During an outside call, press MINTN to put the call on hold.
2MbN: Select the desired unit. a MSELECTN
3Wait for the paged party to answer.
R If the paged party does not answer, press M
N to return to the outside call.
38 | For assistance, please visit http://www.panasonic.com/help |
