Bogen TAMB2 specifications Specifications

Page 8

Specifications

Registration Number:

US: CD2PA13BTAMB2

Ringer Equivalence:

1.3B

Station Port Compatibility:

Two-wire ring start

Trunk Port Compatibility:

Two-wire loop start or ground start

Paging Frequency Response:

200 – 8000 Hz, ±1 dB

Input/Output Impedance:

600 ohms, nominal

Power Requirements:

24V DC @ 150mA (user-supplied)

Pre-announce/Confirmation Tones:

800 Hz, ±20%, one-half second duration

Default Disconnect Timer:

1 to 200 seconds, adjustable or inhibit

VOX Disconnect Timer:

1 to 11 seconds, adjustable or inhibit

Auxiliary Contact Rating:

0.6A @ 125V AC resistive

 

0.6A @ 110V DC resistive

 

2.0A @ 30V DC resistive

Operating Temperature Range:

32° – 120°F.

Connection Method:

Screw terminal

Finish:

Black enclosure with white lettering

Dimensions:

8-1/2" W x 1-3/4" H x 3" D

Shipping Weight:

2 lb.

Limited Warranty; Exclusion of Certain Damages

The Bogen TAMB2 Telephone Access Module is warranted to be free from defects in material and workmanship for two (2) years from the date of sale to the original purchaser. Any part of the product covered by this warranty that, with normal installation and use, becomes de- fective (as confirmed by Bogen upon inspection) during the applicable warranty period, will be repaired or replaced by Bogen, at Bogen’s op- tion, provided the product is shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA. Repaired or replacement product will be returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have been modified or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen's liability arising out of the manufacture, sale or supplying of products or their

use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL

BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PROD- UCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department – same address as above or call 201-934-8500. The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will be at the owner's expense. All returns require a Return Authorization number. For most efficient warranty or repair service, please include a description of the failure.

12/2008

50 Spring Street, Ramsey, NJ 07446, U.S.A.

Tel. 201-934-8500 • Fax: 201-934-9832

www.bogen.com

Image 8
Contents TAMB2 FCC Statement Part 15 Radio Frequency Interference Federal Communications Commission FCC Statement PartTheory of Operation Loop Start InterfacingConnections to Paging Amplifier Input Connections to Telephone Equipment Rotary Control Functions Power Supply Connections Connections to a Music Source Contact Closures DIP Switch SettingsDIP SW # DIP Switch Function Single Unit Rack Mounting Wall MountingSide-By-Side Rack Mounting Specifications