Getting Started
Attaching the Antenna
Apply the antenna to the radio as shown.
Be sure the antenna is firmly seated.
Installing the Alkaline Battery Case
1Snap the battery release clip out and remove the alkaline battery case.
2Remove the battery case cover by pulling the 2 halves apart applying your fingers to
the projections.
3Install 6 AA Alkaline batteries (not included) into the battery case. Be certain to follow the + and – symbols in the compartment.
4Replace the battery case cover as follows until it clicks into place.
5 Place the battery case onto the back of the radio. It will only fit in one way.
6 Snap the battery release clip until it clicks. Be sure the battery case fits tightly against the body.
AA | AA |
| AA |
AA | AA |
| AA |
Contacts
8