Transmitting, Lighted Keys and Display

Transmitting

1Transmission power can be set to either 5W or 1W.

Press the 1/5W/LOCK button to make the change, then the 5W or the 1W indicator on the display

changes accordingly.

2To transmit, press and hold the PTT (push-to-talk) key. TX appears on the display.

3To return to receive, release the PTT key. TX disappears from the display.

•If the PTT key is pressed for more than 5 minutes, TX starts blinking and the transmission ends. The TX time out tone will sound until the PTT key is released.

•If the battery indicator drops to the blinking 1-mark level on the display and the PTT key is pressed, the radio will not transmit and the TX icon starts blinking. (Refer to the description of the Battery Indicator on the next page.)

Lighted Keys and Display

To light the display, press any key excluding the PTT key.

•If you press any button other than the PTT key while the display and keypad are illuminated, it remains illuminated for another 5 seconds.

Turning off and reactivating the Key Beep

Your radio emits a beep each time one of the buttons (except for the PTT key) is pressed.

To turn off or reactivate the Key beep:

Turn the radio on again while pressing and holding the

▲or ▼ buttons.