UT928ZH_UH060_ENG_0929 9/29/04 3:26 PM Page 8
TO OPERATE IN DUPLEX MODE (REPEATERS)
The Duplex function enables you to access local repeater stations. You can only activate Duplex from
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions.
Contact your retailer for a list of repeaters available in your area.
Operation with the aid of a Repeater
Press dup/call key momentarily. The
changes to 
.
Press dup/call key again to deactivate the duplex operation.
If dup/call key is pressed when the channel is not from CH01 - CH08, an error tone sounds.
SCANNING
The scan function scans all channels and stops at an active channel. When the signal stops, the
8