Uniden SMU250K, SMH250D manual Safety information

Page 2

Safety information

Through the provisions of the Occupational Safety and Health Act (OSHA) of 1970, the United Status Department of Labor has established an electromagnetic safety standard which applies to the use of two-way radio equipment. The proper use of this transceiver will result in exposure below the OSHA limit. The following precautions shall be observed:

DO NOT operate the transceiver of any radio equipment with the antenna touching, or close to, the eyes, faces, or exposed body parts.

DO NOT operate the transmitter of any radio equipment unless all the Radio Frequency (RF) connectors are secure and any open connectors are properly terminated.

DO NOT operate the transmitter of any radio equipment near electrical blasting caps or in an explosive environment.

DO NOT let children operate any transmitter-equipped radio equipment.

Have your radio equipment installed and service by a qualified technician.

Caution: RELM does not represent this radio to be waterproof. Do not use the radio in damp or high-moisture environments.

©2000 RELM Wireless Corporation

2

All Rights Reserved

Image 2
Contents SMH250D/SMU250K Safety information Contents Introduction Two-year Limited warrantyService CongratulationsFeatures AccessoriesTechnical Support and Service Programmable FeaturesUnpacking Radio Installation ConsiderationsPower Requirements AntennaControls and Functions Telephone Interconnect FunctionsLCD Display Applying Power and Setting the VolumeGeneral Operation Function TonesChannel Selection Busy Channel Lockout BcloC Key Functions TransmitReceive Drop Out DelayTransmit Time Out Timer Channel Scan