Using the Alkaline Battery Case
When needed, you can use the battery case with Alkaline AA batteries (not included) instead of the rechargeable battery pack.
To install the batteries:
1Remove the battery case cover by pulling the 2 halves apart applying your fingers to the projections.
2Install 6 AA Alkaline batteries (not included) into the battery case.
Be certain to follow the + and – symbols in the compartment.
3Replace the battery case cover as follows until it clicks into place.
AA | AA |
| AA |
AA | AA |
| AA |
Attaching the Beltclip
1Hold the beltclip in the direction as illustrated.
2Apply it to the hanger piece on the back of the radio. Then slide it up.
3When you hear a click, the beltclip is firmly attached.
4To take the beltclip off the radio, turn it upside down and slide it up.
9