Uniden ATLANTIS 250 manual Charging the Battery Pack

Charging the Battery Pack

Your marine radio is powered by a specially designed Ni-MH battery pack.

•Before operating the ATLANTIS 250, charge the Ni-MH battery pack for 16 hours without interruption with the Adapter.

1Place the ATLANTIS 250 in the Cradle. Make sure your radio is OFF.

2 Plug one end of the AC adapter into the wall outlet and the other end into the Adapter jack on the back of the ATLANTIS

250.

3 Charge the battery for 16 hours.

•The charger won’t overcharge the battery pack. After 16 hours without interruption, charging is completed.

•Be sure to replace the rubber cap after charging in order to secure the waterproof seal.

•The radio will not charge the battery while on and receiving incoming voice traffic.

•When you mount the Cradle on your boat, use the DC adapter instead.

•The jack is for charging only. If the battery level is low, the radio needs to charge before use.

10