Uniden FRS500 manual Using Your Radio, Turning the Radio On, Adjusting the Volume

Page 9

Using Your Radio

To get the most out of your new radio, read this reference guide completely before attempting to operate the unit.

Turning the Radio On

2 1

1. Turn the on/off volume control clockwise to turn the unit on.

When you turn on your FRS500, the LCD backlight remains lit for 5 seconds.

2. Turn the control counterclockwise to turn the unit off.

Adjusting the Volume

1. Press the MON button to hear background noise. The “BUSY” icon

and icon appear.

2. Turn the on/off volume control clockwise to increase the volume and counterclockwise to decrease the volume.

You may need to adjust the volume again when audio is heard from the speaker.

6

Image 9
Contents Page Controls On/off volumeFCC Information Contents Welcome Included in Your Package Battery Installation Belt Clip Low Battery AlertUsing Your Radio Adjusting the VolumeTurning the Radio On Busy icon and icon appear while receiving a transmission Choosing a Channel and CtcssPress the ctcss/vibrate button. The code indicator flashes Scan Mode Talking on Your Radio Monitor ModeLocking In Your Selection Vibration AlertSilent Keypad Call Tone TransmissionLCD Backlight External Microphone and Speaker OptionalProblem Solution TroubleshootingChannel Frequency Chart MHz SpecificationsAppendix FRS Radio Rules FCC Part 95 Subpart B §95.194 FRS Rule 4 FRS units 409,688 455,679 461,036 521,915 597,104