Symptom |
| Suggestion |
Can’t make or receive calls. | • | Make sure that you are not too far from the base. |
| • | Make sure the line is not in use. If an outside call is already using a line, you |
|
| cannot use that line to make another outside call. |
| • | Check both ends of the base telephone line cord. |
| • Make sure the AC adaptor is plugged into the base and wall outlet. | |
| • Disconnect the AC adaptor and reconnect. | |
| • | Change the Digital Security Code (see page 69). |
The handset doesn’t ring or | • | Make sure that you are not too far from the base. |
receive a page. | • | Charge the battery in the handset for at least |
|
| on the base or charging cradle. |
| • | Change the Digital Security Code (see page 69). |
Severe noise interference. | • | Keep the handset away from microwave ovens, computers, remote control toys, |
|
| wireless microphones, alarm systems, intercoms, room monitors, fluorescent |
|
| lights, and electrical appliances. |
| • | Move to another location or turn off the source of interference. |
The Caller ID does not | • | The call was placed through a switchboard. |
display. | • | Call your telephone provider to verify your Caller ID service is current. There |
|
| may be a problem with your Caller ID service. |
You cannot register the | • | Charge the battery pack in the handset for |
handset at the base. | • | Change the Digital Security Code (see page 69). |
| • | Make sure you have not stored 10 handsets already. |
The handset doesn’t | • | Change the Digital Security Code (see page 69). |
communicate with other | • | Make sure that you have registered all handsets. |
handsets. |
|
|
70