Compatible Bases
This handset is compatible with Uniden’s 1.8GHz DECT 6015 and DECT 6035 expandable phone series.
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any items are missing or damaged, contact our Customer Service Hotline. See inside the back cover page for contact information.
• Cordless Handset | • Belt Clip |
• Charger | • Printed Material |
•AC Adapter (model #
•Rechargeable NiMH Battery Pack (model #
Installing the Battery
Follow the steps below to install the rechargeable battery pack.
1. Using the finger indentation, press in on the battery case cover and slide it down
to remove it.
2. Plug the battery connector into the battery compartment jack. Be sure to match the red and black wires to the label near the jack.
3. Gently pull on the battery wires. If the battery connector comes loose, try
connecting it again.
4. Replace the battery case cover and slide it up until it clicks into place.
Note: Use only the Uniden
2
DECT6005 OM.indd 2 | 20/8/07 1:49:20 PM |