Base Speaker: You can choose from ten volume levels for the base speaker while on a speakerphone call or when the answering system announces or plays a message. To adjust the base speaker volume, press (to make it louder) or (to make it softer). The base display shows the current volume level for the base speaker.
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the cordless handset earpiece, not the speakerphone and the base corded handset.
To adjust the audio tone:
1)While on a call, press Menu/Select.
2)Move the cursor to select Audio Tone, and then press Menu/Select.
3)Move the cursor to select desired option (High Tone, Natural Tone, or Low Tone), and then press Menu/ Select. Selected option appears in the display for two seconds, and then the display returns to normal.
Activating T-Coil Mode
Digital cordless phones generate magnetic signals that can cause noise on hearing aids equipped with a telecoil (“T” coil) feature. This phone includes a special
1)With the phone in standby, press MENU/SELECT.
2)Select the Handset Setup menu, and then the
3)Move the cursor to select On or Off.
4)Press MENU/SELECT. You will hear a confirmation tone.
When the
Note: Using the
Adjusting the Ringer, Earpiece and Speaker Volume
37