Icom iF25 S instruction manual Panel Description, Front, top and side panels

2 PANEL DESCRIPTION

■Front, top and side panels

q IC-F15S/F25S IC-F15/F25

iw

e

u

Speaker

yr

t Microphone

q CHANNEL SW/SELECTOR

•IC-F15S/F25S: Toggle the channel switch to select the pre-pro- grammed channel 1 or 2.

•IC-F15/F25 : Rotate the channel selector to select the pre- programmed memory channels.

w VOLUME CONTROL [VOL]

Rotate to turn the power ON/OFF and adjust the audio level.

PANEL DESCRIPTION	2
e LED INDICATOR (p. 8)	2

➥Lights red while transmitting.

➥Lights green while receiving a signal, or when the squelch is open.

➥Lights/blinks orange when the matched 2/5-tone code is re- ceived, according to the pre-programming.

r SPEAKER-MICROPHONE CONNECTOR [SP MIC]

Connects the optional speaker-microphone. (p. 31)

[SP MIC] jack cover

NOTE: Attach the [SP MIC] jack cover when the optional speak- er-microphone is not used. (p. 4)

t DEALER-PROGRAMMABLE KEY [Lower]

The desired function can be assigned by your dealer. (p. 9) y PTT SWITCH [PTT]

Push and hold to transmit; release to receive. u DEALER-PROGRAMMABLE KEY [Upper]

The desired function can be assigned by your dealer. (p. 9) i ANTENNA CONNECTOR

Connects the supplied antenna.

DProgrammable key reference

Upper Lower

6 7