VOX Hands-free Transmission | Midland Radio XT511 specs

Model XT511 Series

VOX (Hands-free Transmission)

Your radio has 3 VOX level settings: (oF/1/2/3).

To set VOX, press the MENU button until the display shows “Vo” while on the right, an “oF” icon appears. Select “1”, “2”, or “3” by turning the TUNING knob and push the PTT key, or press MENU button again to move to the next feature setting.

VOX will be more sensitive on the “1” setting than on the “3” setting.

To turn VOX off, press the MENU button until the display shows “Vo” while on the right, a “1”, “2” or “3” icon appears. Select “oF” by turning the TUNING knob and push the PTT key, or press MENU button again to move to the next feature setting.

Note: For VOX Hands-free operation use Midland headset accessories or built-in internal microphone. The accessory hand mic is also intended for VOX mode use.

CALL ALERT SELECTION

Your XT511 Series has 5 selectable CALL ALERTS (oF/1~5).

To select, press the MENU button until a “CA” icon appears and to the right of the “CA” icon the current CALL ALERT setting is displayed. Then turn the TUNING knob to make the CALL ALERT selections - the radio will emit a corresponding tone for each selection. To confirm, press the PTT button or press MENU button to move to the next feature setting.

Note: Setting the CALL Alert to “oF” will disable the CALL Alert function.

ROGER BEEP (end of transmission) TONE

When the PTT button is released, the radio will beep to confirm to other users that your transmission has finished.

To turn the ROGER BEEP tone on, press the MENU button until the display shows an “rb” icon while on the right of the “rb” display, an “oF” icon appears. Select “on” by turning the TUNING knob and push the PTT key, or press MENU button to move to the next feature setting. The ROGER BEEP icon will appear on the display.

To turn the ROGER BEEP tone off, press the MENU button until the display shows an “rb” icon while on the right of the “rb” display, an “on” icon appears. Select “oF” by turning the TUNING knob and push the PTT key, or press MENU button to move to the next feature setting. The ROGER BEEP icon will disappear on the display.

Page 13