Model XT511 Series | ® |
BATTERY INSTALLATION
Your XT511 Series radio operates with either 4 AA alkaline batteries or a NiMH battery pack. Pls. ensure the rechargeable NiMH battery pack is installed in the radio before using the AC or DC adapters.
To install the batteries:
1.With the back of the radio facing you, remove the Battery Cover by pressing down the Battery Cover Lock Tab until it unlocks and lifting it out from the radio.
2.Insert 4 AA batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the unit from operating or may damage the unit. Also install the NiMH battery pack as shown below.
3.Return the Battery Cover by pushing it down into the back of the radio until the Battery Cover Lock Tab locks into place.
Battery Compartment | Battery Cover |
| Lock Tab | |||
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Battery Cover
Alkaline | NiMH |
Batteries | Battery Pack |
INSTALLING THE SHOULDER STRAP
To install the SHOULDER STRAP, slide the SHOULDER STRAP CLIP down into the metal pins on the top of the radio until it locks into place. To remove the SHOULDER STRAP, press the SHOULDER STRAP CLIP tab down, then remove it from the radio.
Shoulder Strap Clip
Metal Pin |
|
|
| Shoulder Strap Clip |
|
|
| ||
|
|
|
|
Metal Pin
Page 8 | www.midlandradio.com |