Ericsson LBI-39012A manual Bsy, Scn, Pvt, Display Alpha Indicators

Page 11

 

Figure 2 - Sample MDX Display

TX

On indicates the radio is transmitting.

BSY

Lights when a channel is busy (RF carrier present).

SCN

ON indicates scan is enabled.

S

ON indicates channel in scan list.

P1

ON indicates selected channel is a priority 1 chan-

 

nel.

P2

ON indicates selected channel is a priority 2 chan-

 

nel.

PVT

Reserved for future use (Aegis Communications).

DISPLAY ALPHA INDICATORS

The radio is capable of displaying status indicators in the alpha display. Some of these messages will use the entire display while others use only two or three characters. When the short message is displayed it may be on the right or left of the display (PC programmable). It is separated from the normal information with an indicator such as an asterisk ("*").

T99

 

T99 call received alternates with current channel

 

 

display.

T99

On

Menu display indicating T99 option is enabled.

T99

Off

Menu display indicating T99 option is disabled.

Pub Addr

Public address option enabled.

11

Image 11
Contents Operator’s Manual Table of Contents Back Cover Safety Information Safe Driving Recommendations for Users of Mobile Radios Operating ProceduresIntroduction Controls CONTROLS, INDICATORS, and DisplaysMDX VHF Conventional Radio Squelch Controls and Indicators Controls CONT’DPublic Address Press the Menu button Scan ADD/DELETE Press the Menu buttonDisplay Indicators PVT Display Alpha IndicatorsBSY SCNOperating the Radio Turning the Radio on Alert TonesSending a Message Conventional Mode OperationSelect Receiving a CallAdding/Deleting To/From Scan Scan Operation Scan SetupStarting Or Stopping Scan Receiver Scan Rate Display Using the Radio with Scan∙ NON-PRIORITY Programmed Transmitting While In Scan Channel Changes In Scan Monitor CLR Switch Operation In ScanPage Page Public Address Option OptionsType 99 Option Option Description Part Number Available OptionsWarranty Page Page Page Page Operating Tips Emergency Numbers