Ericsson LBI-39012A manual Scan Operation Scan Setup, Starting Or Stopping Scan

Page 14

4.Observe the BSY indicator and then press CLR the switch to assure that the channel is not in use.

5.Remove microphone from the hanger, press the PTT switch and

identify yourself. The TX indicator will be shown each time the PTT switch is pressed.

6.Release the PTT switch and wait for an answer to your call. Then complete your message.

7.When the PTT switch is pressed continuously for a pre-programmed time (default of 30 seconds), the carrier control timer (if enabled) will sound a pulsed alert tone and unkey the transmitter. Release and press the PTT switch again to reset the timer and resume conversation.

NOTE

Always speak in a normal tone of voice. Hold the microphone cupped in your hand and touching your cheek lightly. Speak across the face of your microphone, not directly into it. Shouting will degrade your transmission, so do not speak any louder than normal.

SCAN OPERATION

SCAN SETUP

You may program your radio to scan a number of Channels for activity on the selected system.

Starting Or Stopping SCAN

Press the SCAN button to alternate between Scan on (SCN indicator illuminated) and Scan off (indicator dark).

Adding/Deleting To/From SCAN

SCAN should be off before changing the SCAN list.

1.Press the menu button until SCAN A/D is displayed.

2.Press the CHANNEL/SEL (-) button until the CHANNEL name is displayed.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Table of Contents Back Cover Safety Information Operating Procedures Safe Driving Recommendations for Users of Mobile RadiosIntroduction CONTROLS, INDICATORS, and Displays ControlsMDX VHF Conventional Radio Scan ADD/DELETE Press the Menu button Controls and Indicators Controls CONT’DPublic Address Press the Menu button SquelchDisplay Indicators SCN Display Alpha IndicatorsBSY PVTAlert Tones Operating the Radio Turning the Radio onReceiving a Call Conventional Mode OperationSelect Sending a MessageAdding/Deleting To/From Scan Scan Operation Scan SetupStarting Or Stopping Scan Receiver Scan Rate Display Using the Radio with Scan∙ NON-PRIORITY Programmed Transmitting While In Scan Monitor CLR Switch Operation In Scan Channel Changes In ScanPage Page Public Address Option OptionsType 99 Option Available Options Option Description Part NumberWarranty Page Page Page Page Emergency Numbers Operating Tips
Top Page Image Contents