8 SET MODE
DLCD contrast selection “LC”
The contrast of the LCD can be adjusted from 4 levels.
•1 (bright) – 4 (dark); 3 (default)
PUSH
LCD contrast 3 (default) | LCD contrast 1 |
DAuto power save function “PS”
The auto power save function reduces current drain by deac- tivating the receiver circuit for preset intervals.
| PUSH |
Auto power save ON | Auto power save OFF |
(default) |
|
DSelf check function “SC”
The self check function checks transceiver conditions by it- self, and informs you in case a problem is found. The follow- ing items are checked after the power is turned ON, then it switches to operation mode.
•Temperature : Outside of
•Connected battery voltage
•Water intrusion
PUSH
Self check OFF (default) | Self check ON |
When error messages as shown below are displayed, see trouble shooting for advice (p. 28).
Temperature error | Battery voltage error | Water intrusion error |
20