7 LAND CHANNEL OPERATION
■LAND Channel Group
A max. of 22 free LAND mobile channels (allocated 146.000 to 174.000 MHz) can be programmed into the LAND channel group for simple communication with LMR transceivers in the VHF band.
Moreover, any of the marine channels in the USA, INT and CAN channel groups can be programmed.
The default setting of the LAND channel group is the same as that of the INT channel group. Ask your local Icom dealer for the LAND channel group setting and LMR frequency pro- gramming details.
qPush [CH/WX•U/I/C/L] to select a regular channel.
•If a weather channel appears, push [CH/WX•U/I/C/L] again.
w To change the channel group, push [CH/WX•U/I/C/L] for 1 sec several times.
•“ 
” appears when LAND channel group is selected.
ePush [Y]/[Z] to select a channel.
• “DUP” appears for duplex channels.
U/I/C/L
Push
NOTE: The basic settings (e.g. call channel programming) are same as the U.S.A., International and Canadian chan- nels. Refer to the appropriate pages for details.
■Function display
When Narrow, DTCS or CTCSS is set, the display shows the indications as below.
Appears when Narrow chan- nel spacing is set.
Appears when DTCS is set.
Appears when CTCSS set.
16