Welcome to the world of Midland electronics
Congratulations. You have just purchased a state of the art mobile CB radio. In the years ahead, you can expect to realize-time and again the real reasons and meaning of the front running position Midland holds among CB users everywhere. You will come to know that Midland power is more than just a slogan, but the heading of long list of hearable, seeable benefits. As your Midland CB experience unfolds and grows we hope you will remember that CB is only one kind of electronic excellence available under the Midland name.
Your 40 channel CB represents the state of the art in high tech engineering. The unit incorporates microprocessor controlled PLL circuitry for precise tuning.
How to install your Midland mobile CB
This transceiver may be installed in any 12-volt negative ground- system car or truck. Most current U.S. and foreign vehicles use a negative system, but some older models and some newer large trucks may have a positive ground.
Check the requirements for your vehicle before you begin installation.
Generally, you have a negative-groundsystem if the minus ( - ) battery terminal is connected to the motor block. Contact your dealer in the event you are unable to determine your vehicle’s polarity system.
Installation and operating accessories furnished with your Midland CB:
1.Easy removal mounting bracket system.
2.Microphone bracket system.
3.All main-unit and microphone mounting hardware needed for normal installation.
4.Plug-in microphone with coil cord.
5.FCC part 95, Subpart D.
6.Owner’s Manual.
Where to locate your CB transceiver.
Your new Midland CB is designed to be installed under the dash or vertically on a console of your vehicle.