Mode Functions
Operation
NOAA* All Hazards Radio Channels | • | |
You can use your microTALK® radio to listen to NOAA All Hazards | ||
Radio channels transmitting in your area. |
| |
Mode Button | To listen to All Hazards Radio channels: |
|
| 1. Press the Mode button until the WX (All |
|
| Hazards Radio) icon, the currently selected All | |
| Hazards Radio channel, and signal strength |
|
| are displayed. |
|
Hazards Radio Icon 2. Use the Channel Up or Channel Down button |
| |
| to change All Hazards Radio channels. |
|
| 3. WX (All Hazards Radio) icon will continue to |
|
| be displayed when All Hazards Radio is on. |
|
| Choose one of the following: |
|
Channel Button | a. Press the Mode button to proceed |
|
| to other functions. |
|
| b. Press the Lock/Enter button to exit |
|
| All Hazards Radio channels mode |
|
| and return to Standby mode. |
|
| *National Oceanographic and Atmospheric Administration |
|
Introduction | Operation | Customer Assistance Warranty |
| |
Voice Activated Transmit (VOX) | • | |||
In VOX mode, your microTALK® radio can be used | ||||
| ||||
automatically transmitting when you speak. You can set the |
| |||
VOX sensitivity level to fit the volume of your voice and avoid |
| |||
transmissions triggered by background noise. |
| |||
Mode Button | To turn VOX mode on or off: |
| ||
| 1. Press the Mode button until the VOX icon |
| ||
| flashes on the display. The current on or |
| ||
| off setting is displayed. |
| ||
| 2. Press the Channel Up or Channel Down |
| ||
VOX Icon | button to turn VOX on or off. |
|
| 3. Choose one of the following: |
| a. Press the Mode button to enter the |
| selected on or off setting and proceed |
Channel Button | to other functions. |
| b. Press the Lock/Enter button to enter |
| the selected on or off setting and return |
| to Standby mode. |
| To set VOX sensitivity: |
| 1. Press the Mode button until the VOX icon |
VOX Sensitivity Level | flashes and the current sensitivity level |
| is displayed. |
| The current sensitivity level is displayed |
| with letters “LE” and a Number 01 |
| through 05, with Number 05 being the |
| most sensitive level and Number 01 |
| being the least sensitive level. |
2.Press the Channel Up or Channel Down button to change the setting.
3.Choose one of the following:
a.Press the Mode button to enter the selected setting and proceed to other functions.
b.Press the Lock/Enter button to enter the selected setting and return to Standby mode.
13