Cobra Electronics CXR925C NOAA* All Hazards Radio Channels, Voice Activated Transmit VOX

Page 9

Mode Functions

Operation

	NOAA* All Hazards Radio Channels	•
	You can use your microTALK® radio to listen to NOAA All Hazards	•

	Radio channels transmitting in your area.


Introduction	Operation	Customer Assistance	Warranty
Voice Activated Transmit (VOX)				•
In VOX mode, your microTALK® radio can be used “hands-free,”				•

automatically transmitting when you speak. You can set the VOX

Mode Button

Hazards Radio Icon

Channel Button

To listen to All Hazards Radio channels:

1.Press the Mode button until the WX (All Hazards Radio) icon, the currently selected All Hazards Radio channel, and signal strength are displayed.

2.Use the Channel Up or Channel Down button to change All Hazards Radio channels.

3.WX (All Hazards Radio) icon will continue to be displayed when All Hazards Radio is on. Choose one of the following:

a.Press the Mode button to proceed to other functions.

b.Press the Lock/Enter button to exit All Hazards Radio channels mode and return to Standby mode.

sensitivity level to fit the volume of your voice and avoid transmissions
triggered by background noise.
Mode Button	To turn VOX mode on or off:
	1.	Press the Mode button until the VOX icon flashes
		on the display. The current on or
		off setting is displayed.
	2.	Press the Channel Up or Channel Down button
VOX Icon		to turn VOX on or off.

		3. Choose one of the following:
		a. Press the Mode button to enter the selected
		on or off setting and proceed
	Channel Button	to other functions.
	Channel Button	b. Press the Lock/Enter button to enter
		b. Press the Lock/Enter button to enter
		the selected on or off setting and return
		to Standby mode.

*National Oceanographic and Atmospheric Administration

12English

To set VOX sensitivity:

1. Press the Mode button until the VOX icon flashes

VOX Sensitivity Level and the current sensitivity level is displayed.

The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01

being the least sensitive level.

2.Press the Channel Up or Channel Down button to change the setting.

3.Choose one of the following:

a.Press the Mode button to enter the selected setting and proceed to other functions.

b.Press the Lock/Enter button to enter the selected setting and return to Standby mode.

Nothing Comes Close to a Cobra® 13

Image 9

Contents Radio while on the go Making Life Easier and SaferFor Assistance in Canada or the U.S.A For Assistance Outside Canada, the U.S.A. or in FrenchFeatures Product FeaturesCaring for Your microTALK Radio Rechargeable Battery Pack and Desktop ChargerBattery Low Using Your RadioAuto Battery Save Turning on Your microTALK RadioSelectable HighMediumLow Power Output Time-out TimerChannels Listening for a ResponseAuto Squelch/Maximum Range Lock FeatureSpeaker/Microphone/Charge Jack Rewind-Say-AgainUsing your Radio and Mode Functions Scrolling through Mode FunctionsMicroTalk Range Privacy Codes Mode FunctionsSet DCS Privacy Codes Set Ctcss Privacy CodesVoice Activated Transmit VOX NOAA* All Hazards Radio ChannelsMemory Locations To recall a stored memory channel location To de-program a memory locationWhile recalling a stored memory location Channel Scan Press the Lock/Enter button to return to Standby modeTo scan channels If you press the Talk button while scanning, but more thanThis will then return the radio to Standby mode Will automatically return to Standby mode onPrivacy Code Scan Or DCS can be scanned at a timeMemory Location Scan VibrAlert and Call Alert Call Tone SettingsAudible call tone, by vibrating silently or both Roger Beep Confirmation ToneGeneral Specifications General Specifications LicensingFor Products Used in Canada For Products Used in the U.S.ASafety and Trademark Acknowledgement Product ServiceProduct Service Questions Safety Information for microTALK RadiosWarranty Limited One-Year Warranty on Radios & ChargerFor Products Purchased in Canada