Cobra Electronics CXR750 Mode Functions General Specifications, To turn roger beep on or off

Page 15

Mode Functions and

General Specifications

Operation

Roger Beep Confirmation Tone

Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.

Mode Button

To turn roger beep on or off:

 

1. Press the Mode button until the

 

Roger Beep icon flashes on the display.

 

The current on or off setting is displayed.

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

General Specifications

FRS/GMRS Frequency

Allocation and Compatibility

Important: Please note that Cobra GMRS models with 15 Channels may designate different channel numbers for the same frequency. For example, a Cobra 15 Channel GMRS model would need to be tuned to Channel 11 in order to communicate with a 22 Channel GMRS tuned to Channel 15. Please refer to the chart below for

Roger Beep On

Channel Buttons

2.Press the Channel Up or Channel Down button to select roger beep on or off.

3.Choose one of the following:

a.Press the Mode button to enter

the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

channel/ frequency number compatibility.

A = Channel No. for 22 Channel FRS/GMRS Models

B = Channel No. for 15 Channel GMRS Models

C= Type of Radio Service

D= Frequency in MHz

E= Power Output

A

B

C

D

E

1

1

FRS/GMRS

462.5625

High or Low

2

2

FRS/GMRS

462.5875

High or Low

3

3

FRS/GMRS

462.6125

High or Low

Keystroke Tones

With Keystroke Tones turned on, your radio will sound beeps each time you press a button or change a setting.

4

4

FRS/GMRS

462.6375

High or Low

5

5

FRS/GMRS

462.6625

High or Low

6

6

FRS/GMRS

462.6875

High or Low

7

7

FRS/GMRS

462.7125

High or Low

Mode Button

Keystroke Tones On

Channel Buttons

To change keystroke tones:

1.Press the Mode button until the Keystroke Tones icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to turn keystroke tones on or off.

3.Choose one of the following:

a.Press the Mode button to enter the new setting and return to Standby mode.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

8

 

FRS

467.5625

Low

9

 

FRS

467.5875

Low

10

 

FRS

467.6125

Low

11

 

FRS

467.6375

Low

12

 

FRS

467.6625

Low

13

 

FRS

467.6875

Low

14

 

FRS

467.7125

Low

15

11

GMRS

462.5500

High or Low

16

8

GMRS

462.5750

High or Low

17

12

GMRS

462.6000

High or Low

18

9

GMRS

462.6250

High or Low

19

13

GMRS

462.6500

High or Low

20

10

GMRS

462.6750

High or Low

21

14

GMRS

462.7000

High or Low

22

15

GMRS

462.7250

High or Low

24

Nothing Comes Close to a Cobra® 25

Image 15
Contents Customer Assistance Operators Making Life Easier and SaferFor Assistance in the U.S.A Automated Help DeskFeatures Backlit LCD Display Product FeaturesCaring for YourmicroTALKRadio Rechargeable Battery Pack and Desktop ChargerTo install or replace battery pack Replace battery compartment cover and belt clipFor charging microTALK radios in desktop charger Using Your RadioBattery Low Auto Battery SaveTo alert another person that you are calling To toggle between high and low powerTo attach a speaker/microphone To turn the lock feature on or offLight/Max Range To briefly turn off auto squelch To turn maximum range extender onSet Ctcss Privacy Codes Mode FunctionsScrolling through Mode Functions Privacy CodesNOAA* All Hazards Radio Channels Standby modeSet DCS Privacy Codes To select a DCS privacy codeTo set VOX sensitivity To turn VOX mode on or offVoice ActivatedTransmit VOX Memory LocationsWhile recalling a stored memory location Press the Mode button toChoose one of the following To recall a stored memory channel locationThrough To de-program a memory locationChannel Scan Flash on the displayPress the Mode button to proceed to set privacy Press the Channel Up or Channel Down button toPrivacy Code Scan To scan memory locations Memory Location ScanVibrAlert and Call Alert To change call settingsCall Tone Settings To change a call tone settingMode Functions General Specifications To turn roger beep on or offTo change keystroke tones Product Service Questions FCC License Required Product ServiceTrademark Acknowledgement Warranty and Trademark AcknowledgementLimited One-YearWarranty on Radios & Charger For Products Purchased in the U.S.A