EN
Usage 7. Battery replacement
The display fades as the battery runs down. Replace the LR44 battery promptly.
1.Remove the back cover
Use a small Philips screwdriver to remove the 4 case screws from the back of the case, then remove the inner ring and the back cover.
* Handle the screwdriver and any other tools with care.
2. Remove the battery contact plate
Case Philips screws
Remove the two screws fastening the battery contact plate, then remove the contact plate.
3. | Replace the battery |
|
| Take out the old battery and insert a new one (LR44). | Contact |
4. | Fasten the contact plate back in its original position | plate |
| Put the contact plate back in its original position and screw it |
|
| securely into place. |
|
5. Attach the back cover
Fit the inner ring into the groove in the body so that it does not slip out of position, then fit the cover from above. Finally, fasten the cover securely with the four case screws.
Notice
•If you replace the battery yourself, your guarantee may not cover splash resistance, due to misplacement of components,
etc. Check the procedures and positions of components, etc. thoroughly.
•Always reset the system after removing or replacing the battery.
Main specifications
|
| Centimeter version | Inch version |
|
|
|
|
Setting range |
| 20 - 150 cm | 10 - 60 inches |
|
|
|
|
Body weight |
| 20 | 50 - 300 lb |
|
|
|
|
| Distance | Min. 0.01 km, | Min. 0.01 mile, |
| Max. 999.99 km | Max. 999.99 mile | |
|
| ||
|
|
|
|
Display content | Steps | Min. 1 step, Max. 99,999 steps | |
|
|
| |
Time |
| ||
|
| ||
|
|
| |
| Calorie consumption | Min. 0.1 kcal, Max., 9999.9 kcal | |
|
|
|
|
| Walking time | Min. 1 m, Max. 19h, 59 m. |
|
|
|
|
|
Power supply | DC1.5V (LR44 x1) |
|
|
|
|
| |
External dimensions | D13.5 x W42.7 x H54.2 mm |
| |
| * Excluding band |
|
|
Weight | Approx. 40 g |
|
|
|
|
|
|
* It is not possible to switch between centimeter and inch versions.
9
