EN

Usage 3. Changing and revising settings

1.While displayed

2.Use a pointed implement to press the Set button on the side of

the instrument for approximately 2 seconds.

3.The hour number on the display flashes. Start from setting the time.

Usage 4. Changing the display

The display changes each time the Mode button is pressed.

Notice

• The display does not change until the Mode button is released.

• Continued pressing of the Mode button (approximately 3 seconds) resets the display.

Usage 5. Display content reset

The display content can be reset to zero by a long press of the Mode button.

1. While displayed

2. Press the Mode button for at least 3 seconds.

3. The values for steps, calorie consumption, distance and walking time are zeroed.

These values cannot be restored once they have been reset.

7

Page 7
Image 7
Tanita PD642 Usage 3. Changing and revising settings, Usage 4. Changing the display, Usage 5. Display content reset